Siegenia ALU - User Manual


ALU accessories
H48.ZUBHLS003en
Page 1
05.2014
H48.ZUBHLS003en/0
Assembly instructions H48.ZUBHLS003en
ALU concealed turning lock
For details of accessories for SIEGENIA ALU hardware, please refer to the
information on the ALU eurogroove for aluminium profiles for windows and
patio doors.
The system manufacturer’s specifications should also be complied with.
20
22
>10 ≤14
15
21+
1
ALU eurogroove
826 827
828
Item Pieces Material description Material no. Material no.
1 ALU concealed turning lock 1 818916 50 220528
826
1
ALU concealed turning lock
827
1 Locking roller
828
1
Roller bolt
Size range (depends on hardware)
Windows/Patio doors
G2 handle position
≥ 400 mm
It is essential to check the planning manual on aluminium (H4006.3042EN) for
further details and specifications/information regarding the product and liability
(guidelines: VHBH, TBDK and VHBE).

Summary

ALU concealed turning lock

Product Components

Lists ALU concealed turning lock, locking roller, and roller bolt with material numbers.

Technical Dimensions

Details size range for G2 handle position and ALU eurogroove dimensions.

Assembly Instructions

Preparation

Instructions for preparing the operating rod for the ALU concealed turning lock.

Sash and Frame Installation

Steps for positioning and fixing the ALU turning lock onto the sash.

Adjusting Locking Function

Guidance on locking and releasing the turning position using grub screws.

Important Information

Notes on product use, material, and compatibility with SIEGENIA hardware.

Siegenia ALU Specifications

General

Brand	Siegenia
Model	ALU
Category	Locks
Language	English