Need help?Do you have a question about the sielco EXC300GX and is the answer not in the manual?
Declares that the analogical FM broadcast transmitters conform to specified EU directives and standards.
Covers warnings on device handling, electrical safety, good practices, and first aid procedures.
Details warnings related to power lines, service operations, RF fields, and electrical conditions during installation.
Identifies front and rear panel parts for various transmitter and amplifier models.
Details the functions of control panel elements, connectors, and ports.
Outlines essential rules to prevent damage to objects, people, and the equipment during installation.
Covers choosing a suitable room, placement considerations, and climatic conditions for optimal operation.
Provides instructions for wiring the antenna, modulation signals, mains power, and remote control connections.
Covers balanced and unbalanced connections for LEFT, RIGHT, and MPX inputs.
Explains connection and advantages of the optional AES/EBU digital audio input interface.
Details operating with remote control via Ethernet/GSM adapter boards.
Covers initial power-on procedures, frequency, power, modulation, and time settings.
Details the sub-menus within VIEW for checking status, modulation, system parameters, voltages, and temperatures.
Covers all parameters adjustable via the SETUP menu, including frequency, power, passwords, alarms, and Ethernet settings.
Details connecting amplifiers to transmitters using the RS485 serial bus for remote management.
Guides on interpreting alarm messages, LED indicators, and general problem-solving steps.
General| Frequency Range | 87.5 - 108 MHz |
|---|---|
| RF Output Power | 300 W |
| Power Supply | 220V AC ±15% 50/60Hz - Optional: 110V AC ±15% 50/60Hz |
| Modulation | FM |
| RF Output Impedance | 50 ohms |
| Input Impedance | 600 ohms, balanced |
| Audio Input Impedance | 600 Ohm balanced (optional unbalanced) |
To Next Page
