Sielox Class Series User Manual

Sielox Class and AnyWare Quick Start Guide
A. On your desktop PC or laptop, set the Local Area Connection IPV4 settings.
1. Click on the Start icon on the lower left hand corner on a Windows operating system.
2. In the Search programs and files box type Network and Sharing Center window and then click the link
3. Click on Local Area Connection.
4. Click on Properties.
5. Select Internet Protocol Version 4 (TCP/IPv4) and then click on Properties.
6. Select Use the following IP address: and enter 192.168.1.XXX in the IP Address (choose an IP address
not already in use). The Subnet Mask will default to 255.255.255.0, leave the Gateway blank and click
OK.
1.
2.
3.
4.
5.
6.
-More-
© 2014 Sielox LLC | www.sielox.com | 800-424-2126 info@sielox.com | 10/9/14

Sielox Class Series Specifications

General

Brand	Sielox
Model	Class Series
Category	IP Access Controllers
Language	English

Summary

Configure Local Area Connection IPV4 Settings

Set IP Address and Subnet Mask

Manually configure Local Area Connection IPV4 settings, including IP address and subnet mask.

Connect and Power Up Sielox Appliance

Verify Network Connectivity

Confirm successful connection by pinging the appliance's IP address 192.168.1.251.

Log into Sielox Class or AnyWare

Access Appliance Web Interface

Open browser to appliance IP, accept certificate warnings, and log in with default credentials.