Transport, storage and packing
9229 9860 176 0E 13
2013-08-22
• Unscrew all the screws from the side walls.
• Take the supports out of the transport unit.
• Remove the side walls.
• Remove accessory pack and store safely in the packaging for later attachment.
• Remove film from the vacuum circuit-breaker.
• Check the vacuum circuit-breaker for damage.
• Undo tensioning belts, if applicable.
Fig. 16 Removing the supports Fig. 17 Removing the side walls
Fig. 18 Taking out the accessory pack Fig. 19 Removing the film
Siemens Parts
To Next Page
Loading...
