Transport, storage and packing
10 9229 9860 176 0E
2013-08-22
Unpacking (II)
Variant with brackets
Remove carton as described in Fig. 1 and Fig. 3.
Working equipment Required tools:
- Knife/scissors
- Screwdriver
- Open-end wrench
- Lifting equipment with lifting gear.
Transporting with brackets • Remove partitions and accessory pack and store safely in the packaging for
later attachment.
• Attach suitable bolt in the middle pole head.
• Attach sling gear to bolt and to transport boreholes.
Fig. 10 Removing partitions and film Fig. 11 Lifting the vacuum circuit-breaker
To Next Page
Loading...
