Description
28 9229 9860 176 0E
2013-08-22
Low-voltage interface X0, 64-pole
For connection of the control line, the standard version of the vacuum circuit-break-
ers is equipped with a 64-pole low-voltage interface X0 (68.7).
The 64-pole plug (68.7.1) for the external terminal, is suitable for crimp termination
of control lines with a nominal cross-section of 1.5 mm
2
.
Terminal strip (optional) Instead of the 64-pole plug (68.7.1), a terminal strip (68.7.2) can be ordered as inter-
face to the terminal at the customer's site.. Assignment of the terminals is done
according to the circuit diagram supplied.
Fig. 36 Low-voltage interface X0 Fig. 37 Terminal strip (optional)
To Next Page
Loading...
