To Next PageTo Next Page
Need help?Do you have a question about the Siemens 7MF0340 and is the answer not in the manual?
General| Model | 7MF0340 |
|---|---|
| Device Type | Pressure Transmitter |
| Manufacturer | Siemens |
| Measurement Principle | Piezoresistive |
| Input Signal | Pressure |
| Housing Material | Stainless Steel |
| Material | Stainless Steel |
| Output Signal | 4 to 20 mA |
| Protection Class | IP65 |
| Operating Temperature | -40 to 85°C |
Step-by-step guide for commissioning the device without its display unit.
Detailed procedure for commissioning the device when equipped with a display.
Essential conditions to maintain the device's status and ensure safe operation, including observing symbols.
Specific safety precautions and qualifications required for operating the device in potentially explosive environments.
General safety guidelines to prevent injury or damage during installation and mounting procedures.
Criteria for selecting an appropriate installation site, considering environmental factors and protection.
Guidelines for correct mounting techniques to ensure device integrity and preserve its protection type.
Instructions for installing the device in various configurations, excluding level measurement applications.
Specific instructions for installing the device when used for level measurement applications.
Essential safety measures to be observed when connecting the device, especially in hazardous areas.
Step-by-step guide for electrically connecting the pressure transmitter to the system.
Detailed instructions on making the electrical connections, including grounding and terminal connections.
Crucial safety guidelines to follow before and during the commissioning process.
Procedures and safety notes related to powering up the device after connection.
General steps and considerations for setting up the device for operation after installation.
Specific commissioning procedures for different pressure measurement types.
Instructions for commissioning the device for differential pressure and flow rate measurements.
Fundamental safety precautions to observe during inspection, maintenance, and repair activities.
Guidelines and warnings related to performing maintenance and repair on the device.
Provides input specifications for various measurement types like gauge pressure, absolute pressure, and level.
Detailed input specifications for gauge pressure measurements, including spans and limits.
Input specifications for gauge pressure when using a front-flush diaphragm.
Input specifications for gauge pressure derived from differential pressure series models.
Input specifications for absolute pressure measurements from gauge pressure series.
Specifies the measurement accuracy, conformity errors, and stability for SITRANS P320.
Specifies the measurement accuracy, conformity errors, and stability for SITRANS P420.
