To Next PageTo Next Page
Need help?Do you have a question about the Siemens 7MF0360 and is the answer not in the manual?
General| Product designation | SITRANS P DS III |
|---|---|
| Model | 7MF0360 |
| Device Type | Pressure Transmitter |
| Manufacturer | Siemens |
| Measuring range | 0 to 400 bar |
| Pressure Range | 0 to 400 bar |
| Output signal | 4 to 20 mA with HART |
| Power supply | 10 to 36 V DC |
| Housing material | Aluminum or Stainless Steel |
| Protection class | IP67 |
| Accuracy | ±0.075% of span |
| Process Connection | 1/2 NPT |
| Electrical Connection | M20 x 1.5 |
| Operating Temperature | -40 to +85 °C (-40 to +185 °F) |
| Material | Stainless Steel |
Step-by-step guide for commissioning the device without a display.
Step-by-step guide for commissioning the device with a display.
Details qualifications and precautions for using the device in hazardous areas.
Provides fundamental safety guidelines for installation and mounting.
Specifies requirements for the physical location where the device is installed.
Details correct procedures and precautions for mounting the device securely.
Essential safety guidelines to follow before connecting the device.
Step-by-step instructions for electrically connecting the device.
Crucial safety measures to observe before and during commissioning.
Instructions for safely switching on the power supply to the device.
General steps and checks for commissioning the device.
Commissioning procedures for specific pressure measurement types.
Procedures for commissioning differential pressure and flow measurements.
Fundamental safety guidelines for performing service and maintenance.
Outlines procedures and precautions for maintenance and repair.
Explains how diagnostic messages are signaled and interpreted.
Specifies input ranges and limits for various measurement types.
Provides technical data for gauge pressure measurements.
Technical data for gauge pressure measurements with front-flush diaphragm.
Technical data for gauge pressure from differential pressure series.
Technical data for absolute pressure from gauge pressure series.
Technical data for absolute pressure with front-flush diaphragm.
Technical data for absolute pressure from differential pressure series.
Technical data for differential pressure and flow measurements.
Technical data for level measurements.
Details the measuring accuracy specifications for SITRANS P320.
Provides gauge pressure accuracy data for SITRANS P320.
Accuracy data for gauge pressure from differential pressure series.
Details the measuring accuracy specifications for SITRANS P420.
Details the environmental and operational conditions for the device.
Specifies the device's resistance to vibrations and shocks per standards.
Details the physical construction and materials of the device.
Lists the certifications and approvals obtained by the device.
