Siemens BACnet ATEC - Temperature Sensors; Room Temperature Sensor; Duct Temperature Sensor; Related Equipment

Chapter 1 – Product Overview
13
Siemens Industry, Inc.
BACnet ATEC Owner's Manaul
125-5050, Rev. AA
4/20/2010
Temperature Sensors
Room Temperature Sensor
The controller room temperature sensor connects to the controller by means of a cable
terminated at both ends with a six-conductor RJ-11 plug-in connector.
Duct Temperature Sensor
An optional duct temperature sensor provides duct air temperature sensing inputs to
the controller.
For more information about temperature sensors, contact your local Siemens Industry
representative.
Related Equipment
 Autozero Module (optional) 540-200
 Relay Module
 Damper Actuator(s)
 Duct Temperature Sensor (optional)
 Room Temperature Sensor
Contact your local Siemens Industry representative for product numbers and more
information.