Childproof lock en
13
‒ When the food is ready, use to switch the ap-
pliance off.
Changing the end time
To achieve good cooking results, only change the set
time before the operation starts and before the cooking
time starts counting down.
1.
Press the end time.
2.
Use or to change the time.
3.
Press "Apply".
Cancelling the end time
You can delete the set time at any time.
1.
Press the end time.
2.
Use
3.
Press "Apply".
9.3 Setting the timer
You can set the time on the timer. Once this time has
elapsed, a signal tone sounds. You can set a maximum
time on the timer of 24hours. The function works inde-
pendently of the operation and other time-setting op-
tions. The timer signal is different from other signals.
1.
Press .
a The minutes flash.
2.
Use and to set the minutes.
3.
To set the hours, press the hours.
4.
Use and to set the hours.
5.
To set the seconds, press the seconds.
6.
Use and to set the seconds.
7.
Press "Start".
a The timer starts.
a On some displays, the timer continues to count
down in the background. Press to display the
timer.
Ending the timer
Requirement:A signal sounds.
▶
Press any field.
a The timer is switched off.
Changing the timer
1.
Press .
2.
Press "Stop".
a The minutes flash.
3.
Use and to set the minutes.
4.
To set the hours, press the hours.
5.
Use and to set the hours.
6.
To set the seconds, press the seconds.
7.
Use and to set the seconds.
8.
Press "Start".
Cancelling the timer
1.
If the timer is running in the background, use to
select the timer beforehand.
2.
Press .
Childproof lock
10 Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
10.1 Activating the childproof lock
▶
Press and hold for approx. 4 seconds.
a The control elements are locked.
a If a timer duration has been set, this continues to
count down. While the child lock is active, the timer
duration cannot be changed. To end signal tones,
e.g. once the timer duration has elapsed, press any
button.
10.2 Deactivating the childproof lock
1.
Press and hold for approx. 4 seconds.
2.
The controls are unlocked.
Basic settings
11 Basic settings
You can configure the basic settings for your appliance
to meet your needs.
11.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
Notes
¡ Changes to the language, button tone and display
brightness settings take effect immediately. All other
settings do not take effect until you save them.
¡ Your changes to the basic settings will be retained
for some time even after a power cut.
Basic settings Selection
Language See selection on the ap-
pliance
Basic settings Selection
Time "Time" in 24-hour format
Date "Date" in the format
DD.MM.YYYY
Display Selection
Brightness ¡ Settings 1 to 8
1
"Time", standby mode ¡ On (this setting in-
creases energy con-
sumption)
¡ displayed, for set time
1
¡ Off
1
Factory setting (may vary according to model)