Private Communication Systems
Mobile Phones
6 Software programming
The software of the C1x handset is programmed directly from a PC using a
bootadapter as an interface beetween serial port of the PC and the mobile.
6.1 Description of software booting
Connect COM-port of PC to the bootadapter
using the enclosed RS232 cable.
ˆ Afterwards plug in AC-Adapter: If connected
correctly the “Power” lamp will be active.
9 Switch off the C1x handset and connect it to the
boot adapter.
X Copy bootsoftware to the PC and follow the
instructions in the file “readme.txt”.
Ordering number of Bootadapter: L24857-F1006-A30
The bootadapter comes complete with AC-
Adapter, RS-232 and handset connection cable.
6.2 Language Groups
Since the C1x has a big memory, a lot of languages fit into one handset
software.
That’s why there is only one language group at the moment. More may be defined later.
Catalan Cestina Danish
Dutch English Finnish
French German Greek
Hungar Inggris Italian
Malayian Norsk Polish
Portu Russian Spanish
Swedish Turkish
Attention:
This information is subject to change! Contact your service coordinator for the latest
update and ordering numbers.
Service Manual C1x V 1.0 PN MP ST
R. Fleuren
Sm_C1x_lvl2_v10_w97.doc Page 17 of 23 09/98
To Next Page
Loading...
Need help?
General
