Siemens CCDA1435-DNX

Fire Safety & Security Products
Siemens Building Technologies
¼” High Speed Dome Camera CCDA1435-DNX
Quick Installation Guide
5
COM
Alarm1
Alarm2
Alarm3
N.O(Nor mal Open)
Alarm4
GND
N.C(Normal Close)
Data+
Data-
7
6
9
8
10
D
E
5
11
134
Unit:mm
1
4
3
2
220
164
C
AB
1 Dome base 5 Mounting brackets 9 BNC connector
2 Hook 6 Switch for termination 10 Notch for installation
3 Support wire 7 Terminal for control & Alarm IN/OUT 11 Installation label
4 Dome drive 8 Terminal for power
Control unit CKA482 0
Dome 1 Dome 10
. . .
RS485
TTY
TTY
SIMATRIX 648 Control unit CKA4820 Control unit CKA4820
DomeConverter CAC0103
Dome 1 Dome 10
. . .
RS485
RS485
Interface multiplier
CAD0485-AA
WARNING
1. To reduce the risk of fire or electrical shock, do not expose this product to
rain or moisture.
2. This installation should be made by a qualified service person and should
conform to all local codes.
3. Connect the equipment to 24 VAC UL Listed Class 2 Power Supply.
CAUTION
1. To reduce the risk of electric shock, do not remove cover (or back). No user-
serviceable parts inside.
2. Servicing should only be carried out by qualified service personnel.
3. Ensure that the safety wire (located in the dome base) is engaged.
4. Align notch with "OPEN" arrow and turn dome until notch meets arrow in
"LOCKED" position.
5. Check assembly by pulling on dome. Assembly should not come apart.
6. Only use the supplied EMI core for the power supply.

Siemens CCDA1435-DNX Specifications

General

Lens Mount	M12
Weather Resistance	IP66
Day/Night	Yes
Power	12 V DC, PoE
Type	Dome
Lens	2.8 mm
Operating Temperature	-30°C to +60°C

Summary

Safety Information

WARNING

Important safety warnings regarding fire or electrical shock risks and proper installation.

CAUTION

Important cautions to prevent electric shock and ensure correct assembly and safe operation.

Package Contents

Installation Guide

Installation Steps

Step-by-step instructions for setting up the camera, connecting wires, and securing components.

Connections Overview

Guidance on connecting multiple speed domes via control panels or matrix connections.

Operation and Setup

Start Up Procedure

Describes the camera's brief homing routine and information display upon power-up.

Camera Operation

Instructions on controlling pan/tilt/zoom functions and operating via preset commands.

Camera OSD Setup

Guidance on accessing the OSD menu for camera settings, including pan/tilt and presets.

Maintenance

Guidelines for proper disposal of electrical and electronic products.

Technical Data