Siemens CF62 - Conference

© Siemens AG 2003, I:\Mobil\R65\A65_Leopard_abgel._von MC60_Maguro\am\fug\A65_Phone.fm
29Calling
VAR Language: American; VAR issue date: 21-Januar-2004
left page (29) of CF62 Leopard us-en, A31008-H6050-A40-1-4A19 (24.02.2004, 16:32)
Incoming calls during a call
You may need to register for this ser-
vice with your service provider and
set your phone accordingly
(page 76). During a call, you may be
advised that there is another call
waiting. You will hear a special
tone during the call. You have the
following options:
• Accept the waiting call
§Toggle§ Accept the waiting call,
putting the current call on
hold to do so.
To swap between the two calls, pro-
ceed as described above.
End call(s):
Press End key
B
. According to the
display: Return to held call? you have
the following choice:
§Yes§ You accept the held call.
§No§ You also end the second
call.
• Reject waiting call
§Reject§ Press.
Or
§Divert§ The waiting call is for-
warded, for example,
to the mailbox.
• Accept the waiting call and end the
current call
B
End the current call.
§Answer§ Accept new call.
Conference
Call up to 5 parties one by one and
link them together in a conference
call. Some of the functions described
may not be supported by your service
provider or may have to be specially
enabled. You have established a con-
nection:
y Menu§ Open menu and select
Hold. The current call is
put on hold.
J
Now dial a new number.
When the new connection
is established ...
y Menu§ …open menu and select
Conference. The held call is
joined.
Repeat procedure until all partici-
pants are linked together (up to
5participants).
End
B
All connections in the con-
ference call are ended
when the End key is
pressed.