Siemens CF62 - Page 77

© Siemens AG 2003, I:\Mobil\R65\A65_Leopard_abgel._von MC60_Maguro\am\fug\A65_Setup.fm
77Setup
VAR Language: American; VAR issue date: 21-Januar-2004
left page (77) of CF62 Leopard us-en, A31008-H6050-A40-1-4A19 (24.02.2004, 16:32)
No reply
A call is only forwarded after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5 second intervals.
Busy
Call forwarding occurs if a call is in
progress. If Call waiting is activated
(page 76), you will hear the call
waiting tone during a call.
Status check
You can check the current forward-
ing status for all conditions.
After a short pause, the current situ-
ation is transmitted via the network
and displayed.
p Condition set.
o Not set.
s
Display if status is
unknown (e.g. with
anewSIM card).
Clear all
b
All forwarding settings are cleared.
Additional information
Note that the forwarding is stored in the net-
work and not in the phone (e. g., when the
SIM card is changed).
Check condition or delete it
First select the condition.
§Selection§ Press.
Check status
Select.
Or
Delete Select.
Reactivate call forwarding
The last forwarded call has been stored.
Proceed as with "Set call forwarding". The
stored phone number is displayed. Confirm
phone number.
Edit phone number
Proceed as with "Set call forwarding". When
the stored number is displayed:
§Delete§ Press. The phone number is
deleted.
Enter new number and confirm.