Siemens CF62 - Page 80

© Siemens AG 2003, I:\Mobil\R65\A65_Leopard_abgel._von MC60_Maguro\am\fug\A65_Setup.fm
Setup80
VAR Language: American; VAR issue date: 21-Januar-2004
left page (80) of CF62 Leopard us-en, A31008-H6050-A40-1-4A19 (24.02.2004, 16:32)
§Menu§
KmKConnectivity
KSelect function.
Data services
For the MMS, WAP and HTTP applica-
tions, at least one connection profile
must be set up and activated.
The default for the phone depends
on the respective service provider:
• The settings have already been
implemented by the provider. You
can start immediately.
• Access profiles have already been
created by your provider. Then
select and activate profile.
• The access profiles must be con-
figured manually.
If necessary, check with your service
provider for details. Current settings
for each service provider can be
found on the Internet at www.sie-
mens-mobile.com/customercare in the
FAQ section.
I
Select profile.
E
Open menu.
Change sett.
Press, then:
For CSD (Circuit Switched Data)
CSD settings
Select.
If it has not been preconfigured,
enter the data or the required set-
tings (your service provider will sup-
ply you with information on this):
E
Press.
§Save§ Save settings.
For GPRS
(General Packet Radio Service)
GPRS settings
Select.
You can activate GPRS for the profile
and change the settings here. You
cannot start to use GPRS until you
have activated GPRS on your phone
(page 79).
E
Press.
Dial-up num-
ber
Enter ISP number.
Call type:
Select ISDN/analog.
Login name:
Enter login name.
Password:
Enter password (shown as
a series of asterisks).
DNS1 /
DNS 2:
(optional).