Siemens CPU 313C-2 DP

CPU 31xC and CPU 31x, Technical Data
Manual, 01/2006 Edition, A5E00105475-06
Index-1
Index
(
(Simple Network Management Protocol), 3-27
A
Aim of this Documentation, iii
Analog inputs
Configuration, 6-40
Not connected, 6-37
Technical data, 6-49
Analog outputs
Not connected, 6-37
Technical data, 6-51
Applicability of this manual, A-2
Application area covered by this manual, iii
Application View, 3-17
Automation concept, 3-17
B
Blocks, 3-20
compatibility, 3-20
Download, 4-10
Upload, 4-11, 4-12
C
Communication
Communication protocols, 3-24
CPU services, 3-6
Data consistency, 3-15
Global data communication, 3-9
Open IE communication, 3-24
S7 basic communication, 3-8
S7 communication, 3-8
Communication load
configured, 5-8
Dependency of physical cycle time, 5-9
Influence on the physical cycle time, 5-9
Communications concept, 3-17
Component-Based automation, 3-17
Compression, 4-12
Configuration
Interrupt inputs, 6-38
Standard AI, 6-40
Standard DI, 6-38
Standard DO, 6-39
Technological functions, 6-42
Consistent data, A-6
CPU 312C
Technical data, 6-3, 7-3, 7-8, 7-13, 7-26
Technical Data, 6-9, 7-33, 7-40, 7-49
Usage of integrated I/Os, 6-28
CPU 313C
Technical data, 6-8
Usage of integrated I/Os, 6-30
CPU 313C-2 DP
Technical data, 6-14
Usage of integrated I/Os, 6-30
CPU 313C-2 PtP
Technical Data, 6-14
Usage of integrated I/Os, 6-30
CPU 314C-2 DP
Technical data, 6-21
Usage of integrated I/Os, 6-30
CPU 314C-2 PtP
Technical Data, 6-21
Usage of integrated I/Os, 6-30
CPU memory reset, 4-13
CPUs 31xC
Differences, 2-4
Cycle time
Calculation, 5-4
Definition, 5-2
Extension, 5-3
Maximum cycle time, 5-8
Process image, 5-2
Sample calculation, 5-23
Sequence of cyclic program processing, 5-2
Time slice model, 5-2