Siemens DF301 Basic Documentation

10 / 92
Siemens………………………RDF301, RDF301.50..., RDF600KN, RDF600KN/VB, RDF600KN/S Basic Documentation CE1P3171en
Smart Infrastructure 2020-02-21
· Operating modes: Comfort, Economy (Energy Saving) and Protection
· ON/OFF or 3-position control outputs (relay)
· Output for 3-speed or 1-speed fan
· Automatic or manual heating / cooling changeover
· Backlit display
· AC 230 V operating voltage
· RDF600KN… for round CEE conduit box, with min 60 mm diameter,
min 40 mm depth or recessed square CEE conduit box
with 60.3 mm fixed centers
· RDF301… for recessed square CEE conduit box
with 60.3 mm fixed centers
· Room temperature control via built-in temperature sensor or external room
temperature / return air temperature sensor.
· Changeover between heating and cooling mode (automatic via local sensor or
bus, or manually).
· Selection of applications via DIP switches or commissioning tool.
· Select operating mode via operating mode button on the thermostat.
· Temporary Comfort mode extension.
· 1- or 3-speed fan control (automatically or manually).
· Display of current room temperature or setpoint in °C and/or °F.
· Minimum and maximum limitation of room temperature setpoint.
· Button lock (automatically or manually).
· 2 multifunctional inputs, freely selectable for:
– Sensor for automatic heating / cooling changeover
– External room temperature or return air temperature sensor
– Dew point sensor
– Electric heater enable
– Fault input
– Monitor input for temperature sensor or switch state
RDF301…
– Operating mode switchover contact … (keycard, window contact, etc.)
RDF600KN…:
– Window contact
– Presence detector (Standard presence mode and Hotel presence )
See pages 15 & 18.
· Advanced fan control function, e.g. fan kick, fan start, selectable fan operation
(enable, disable or depending on heating or cooling mode).
· "Purge" function together with 2-port valve in a 2-pipe changeover system.
· Reminder to clean fan filters (adjust with P62).
· Floor heating temperature limitation.
· Reload factory settings for commissioning and control parameters.
Fea
tu
res
Type of mounting /
suitable conduit boxes
Functions

Siemens DF301 Specifications

General

Brand	Siemens
Model	DF301
Category	Thermostat
Language	English