Siemens RDG160T User Manual

CE1N3181en
2017-11-20
Building Technologies
s
3
181
RDG100
RDG110
RDG110U
RDG100T RDG100T/H
RDG160T
RDG160TU
Wall-mounted room
thermostats with LCD
RDG1..
for fan coil unit applications
for universal applications
for use with compressors in DX-type equipment
∂ RDG100..: Operating voltage AC 230 V, On/Off, 3-positon or PWM control
outputs
∂ RDG110: Operating voltage AC 230 V, On/Off relay (SPDT) outputs
∂ RDG110U: Operating voltage AC/DC 24 V, On/Off relay (SPDT) outputs
∂ RDG100../RDG110..: Output for 1-speed and 3-speed
∂ RDG160T..: Operating voltage AC/DC 24 V, DC 0…10 V or On/Off control
outputs
∂ RDG160T..: Output for 1-speed, 3-speed or ECM fan DC 0...10 V
∂ Operating modes: Comfort, Economy and Protection
∂ Automatic or manual fan speed
∂ 3 multifunctional inputs for keycard contact, external sensor, etc
∂ Automatic or manual heating/cooling changeover
∂ Adjustable commissioning and control parameters
∂ Minimum and maximum setpoint limitation
∂ Backlit display
Additional features of RDG100T, RDG160T.., RDG100T/H:
∂ Infrared remote control receiver
∂ Auto Timer mode with 8 programmable timers
∂ Auto timer can be disabled via P02
∂ Auto timer can be disabled via DIP switches (RDG160T..)
∂ Landscape design (RDG100T/H only)
∂ Selectable relay output functions (RDG160T..)

Siemens RDG160T Specifications

General

Device Type	Room thermostat
Display	LCD
Power Supply	AC 230 V
Mounting Type	Wall-mounted
Digital inputs	1
Relay outputs	2
Degree of protection	IP30
Accuracy	±0.5 °C
Weight	150 g

Summary

Use

Functions

Applications, DIP setting, Control outputs

Type summary

Equipment combinations

Accessories

Mechanical design

Operation and settings

Display

Mounting and installation

Commissioning

Temperature unit selection wizard (only for RDG110U and RDG160TU)

Guides selection of °C or °F display units for specific models.

Control sequence

Explains setting control sequences for different applications.

Compressor-based application

Details on setting minimum output on-time for compressors.

Calibrate sensor

Instructions for recalibrating the room temperature sensor.

Adaptive temperature compensation for el. heating

Notes on adjusting load current for electric heaters.

Setpoint and setpoint range limitation

Recommends reviewing and adjusting setpoint parameters.

Disposal

Information on environmentally compliant disposal of the device.

Technical data

Eco design and labelling directives

Details on eco design classes and labelling directives for space heaters.

Operational data, all types

Specifies operational parameters like switching differential and setpoints.

Environmental conditions

Lists climatic conditions for operation, transport, and storage.

Standards and directives

Outlines conformity with EU, RCM, UL, CSA, and safety standards.

Environmental Compatibility

General

Connection terminals

Details on wire types, sizes, and cross-sections for terminals.

Connection diagrams

RDG100..

Wiring diagrams for RDG100.. models for various applications.

RDG110

Wiring diagrams for RDG110 models for various applications.

RDG110U

Wiring diagrams for RDG110U models for various applications.

RDG160T

Wiring diagrams for RDG160T models for various applications.

RDG160TU

Wiring diagrams for RDG160TU models for various applications.

Dimensions

RDG1..

Physical dimensions and mounting details for RDG1.. series.

RDG100T/H

Physical dimensions and mounting details for RDG100T/H.