Siemens RDF301 User Manual

CE1N3171en
2020-02-21
Smart Infrastructure
3
171
RDF301
RDF600KN
RDF600KN/VB RDF301.50
RDF600KN/S
RDF301.50H
Semi flush-mount
communicating room
thermostats
RDF301
RDF301.50..
RDF600KN
RDF600KN/VB
RDF600KN/S
For 2-pipe, 2-pipe with electric heater, and 4-pipe fan coil units
For use with compressors in DX type equipment
· KNX bus communications (S-mode and LTE mode)
· Backlit display
· 2P / PI / P control
· Outputs for on/off or 3-position control
· Outputs for 3-speed or 1-speed fan
· 2 multifunctional inputs for keycard contact, external sensor, etc.
· Operating modes: Comfort, Economy and Protection
· Automatic or manual fan speed control
· Automatic or manual heating/cooling changeover
· Minimum and maximum limitation of room temperature setpoint
· Control depending on the room or the return air temperature
· Adjustable commissioning and control parameters
· Commissioning with Synco ACS, ETS or via local HMI
· Integration into Synco
· Integration into Desigo and Apogee via group addressing (ETS) or via
individual addressing
· Integration into third-party system via group addressing (ETS)

Siemens RDF301 Specifications

General

Brand	Siemens
Model	RDF301
Category	Thermostat
Language	English

Summary

Use

Functions

Applications

Applications for fan coil systems

Applications for Universal systems*

Applications for heat pump systems

Type summary

Ordering

Equipment combinations

3-position actuators

Accessories

Mechanical design

Operation and settings

Details the physical controls and user interface elements.

Display

Explains the thermostat display icons and information presented.

Engineering notes

Mounting and installation

Guidance on physical installation and placement of the thermostat.

Wiring

Instructions and warnings for electrical wiring connections.

Commissioning notes

Applications

Selecting and activating thermostat applications.

Connect tool

How to connect commissioning tools like ACS/ETS to the KNX bus.

Control parameters

Control sequence and compressor application

Settings for heating/cooling sequence and compressor protection.

Setpoint and KNX configuration

Adjusting setpoints and configuring KNX addresses and groups.

Disposal

Technical data

Power supply and outputs

Details voltage, power consumption, and output ratings.

Inputs and KNX bus

Information on input types and KNX bus interface specifications.

Operational data

Switching differential, setpoint ranges, and input default values.

Environmental conditions

Standards and directives

Environmental Compatibility

General

Reference documentation

Connection terminals

Connection diagrams

Dimensions