Need help?Do you have a question about the Siemens RDF300 and is the answer not in the manual?
General| Operating Voltage | AC 230 V |
|---|---|
| Relay Outputs | 2 |
| Protection Class | IP30 |
| Type | Room thermostat |
| Hysteresis | 1 K |
| Mounting | Wall mounting |
| Temperature range | 0 to 50 °C |
| Accuracy | ±1 K |
| Ambient temperature | 0 to 50 °C |
| Relative humidity | ≤ 95% (non-condensing) |
| Weight | 140 g |
Explains how the controller regulates room temperature using sensors and control outputs.
Describes the different modes like Comfort, Energy Saving, and Standby.
Details how to set and limit temperature setpoints for various operating modes.
Outlines the various system applications supported by the controllers, configurable via DIP switches.
Explains how the controller sequences outputs for different heating/cooling modes and applications.
Explains the different control output signals (on/off, 3-position, DC 0-10V) and their functions.
Details how the fan operates in automatic and manual modes, including speed selection and special functions.
Details the functionality of the two multifunctional inputs (X1, X2) and their configurations.
Explains the Auto Timer function with 8 programmable timers for mode switching.
Guides on how to readjust control parameters for optimizing performance, including Service and Expert levels.
To Next Page
