Siemens EH Series - Getting to Know Your Appliance; Control Panel Overview; Hotplate Details

Getting to know your appliance en
9
*Getting to know your
appliance
Getting to know your appliance You can find information on the dimensions and power
of the hotplates in~ Page 2
The control panel
Controls
Touching a symbol activates the respective function.
Note: . Always keep the control panel clean and dry.
Moisture can prevent it from working properly.
The hotplates
Residual heat indicator
The hob has a residual heat indicator for each hotplate.
This indicates that a hotplate is still hot. Do not touch a
hotplate while the residual heat indicator is lit up.
The following are shown depending on the amount of
residual heat:
■ Display •: High temperature
■ Display œ: Low temperature
If you remove the cookware from the hotplate during
cooking, the residual heat indicator and the selected
heat setting will flash alternately.
When the hotplate is switched off, the residual heat
indicator will light up. Even after the hob has been
switched off, the residual heat indicator will stay lit for as
long as the hotplate is still warm.
Controls
#
Main switch
»
Selecting a hotplate
0 IIIIIIIIIIII Settings range
b PowerBoost function
#
Locking the control panel for cleaning
‚
Childproof lock
0
Timer function
Indicators
‹
Operating status
‚-Š
Heat settings
‹‹
Timer function
•/œ
Residual heat
›
PowerBoost function
x
Programming the cooking time
V
Kitchen timer
ö
Time display
÷
Energy consumption
Hotplates
$
Simple hotplate Use cookware that is a suitable size.
î
Extended cooking zone The hotplate switches on automatically when you use cookware with a base that covers the
outer edge of the zone.
Only use cookware that is suitable for induction cooking; see section ~ "Induction cooking"