13
To access the basic settings
The hob must be turned off.
1.Turn on the hob with the main switch.
2.Within the next 10 seconds, press the 0 symbol and hold for
4 seconds.
™‚ y is displayed on the left of the screen and ‹ on the right.
3.Press the 0 symbol several times until the indicator for the
desired function appears on the left of the screen.
4.Then select the desired setting in the programming panel.
5.Press the 0 symbol again and hold for more than
4seconds.
The settings will have been correctly saved.
Quit
To leave the basic settings, turn off the hob at the main switch.
To Next Page
Loading...
