EasyManua.ls Logo

Siemens EQ.6 Plus s300 - Cleaning Internal and External Parts

Siemens EQ.6 Plus s300
112 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42
en Care and daily cleaning
L
Do not put the following parts in the
dishwasher:
Panel of drip tray 17a, cover 4a, brewing
unit 14, water tank 5 and aroma cover 10.
M
The following parts may be cleaned in
the dishwasher:
Drip tray 17, drip plate 17b, coffee grounds
container 17c, measuring spoon 8 and
the upper and lower parts of the milk
system 4b.
F
Important: The drip tray 17 and
coffee grounds container 17c should
be emptied and cleaned every day in
order to prevent deposits.
F
If the appliance is cold when
switched on, or if it is switched off
after dispensing coffee, it rinses auto-
matically. The system is therefore
self-cleaning.
F
Important: If at any time the appli-
ance is not used for a lengthy period
(e.g. holiday), clean the entire appli-
ance thoroughly, including the milk
system 4b and brewing unit 14.
Cleaning the milk system
A
Be sure to clean the milk system 4b
every time you make a drink involving
milk!
F
The milk system 4b is automatically
cleaned with a short jet of steam
directly after preparing a milk drink.
For particularly thorough cleaning,
the milk system 4b can be auto-
matically rinsed with the programme
Cleaning the milk system” (see the
section “Service programmes –
Cleaning the milk system”).
Cleaning by hand
B
Risk of burns!
The milk system 4b becomes
extremely hot. After use, always let
them cool down before you touch
them.
Take the milk system 4b apart to clean it:
Push the beverage outlet 4 right down.
Take off the cover 4a towards the front
and pull off the milk tube.
Remove the milk system 4b by pulling it
straight forward.
Take apart the upper and lower parts of
the milk system 4b.
Separate the milk tube from the suction
pipe.
Clean the individual parts with washing-
up liquid and a soft cloth.
Rinse all parts with clean water and dry
them.

Table of Contents

Related product manuals