Menu settings en
25
Q Menu settings
Menu set t i ngs
This menu is used for changing settings
individually, accessing information and
starting a programme.
Changing settings
1. Press $/± button, turn the rotary
selector to the left and select
"Settings". Press the rotary selector.
The different setting options will
appear in the display.
2. Select the desired setting using the
rotary selector.
The current setting is highlighted in
colour on the display.
3. Press the navigation button under
"select".
4. Use the rotary selector to change the
setting.
5. Press the navigation button under
"confirm".
The setting has been saved.
6. Press $/± button to exit "Menu".
The drink selection appears on the
display.
Notes
■ You can switch to the previous level
by pressing the navigation button
under "back".
■ The setting procedure can be
aborted by pressing the navigation
button under "abort".
■ Press $/± button to exit the menu at
any time.
■ If no entry is made within approx.
2 minutes, the menu closes
automatically and the settings are
not saved.
The following settings are available:
Settings Possible settings Explanation
Language Different languages Setting the language to be used for display texts.
Water hardness ■ 1(soft)
■ 2(medium)
■ 3(hard)
■ 4(very hard)
■ Water-softening system
Setting in line with the hardness of the local
water supply.
The preset water hardness is level 4(very hard).
The water hardness can be requested for exam-
ple from your local water supplier.
It is important to set the water hardness cor-
rectly so that the appliance indicates in good
time when the descaling programme must be
run.
If a water softening system is installed in the
house, please select "Softening device".
Home Connect* Settings for connection to WLAN network (home network) and mobile devices
(see section "Home Connect").
Switch off after 5 minutes
up to to
3 hours
Setting that determines how long the appliance
should wait after the last beverage preparation
before it automatically switches itself off.
The factory setting is 30 minutes.
Brightness display Level 1up to level 10
Standard setting 7
Setting that governs the brightness of the dis-
play
To Next Page
Loading...
Need help?
General
