Basic operation en
43
7.3 Dispensing a coffee drink
made from fresh beans
1.
Place a cup under the outlet sys-
tem.
2. To set the coffee strength, press
the button repeatedly.
3. Press button or .
a The coffee is brewed and then dis-
pensed into the cup.
Tip:To stop the current dispensing
step early, press the or
button.
7.4 Dispensing drinks with
milk
You can make coffee drinks with milk
or froth up milk.
WARNING
Risk of burns!
The milk frother gets very hot.
▶ Let the milk frother cool down be-
fore you touch it.
ATTENTION!
Milk residues can dry on surfaces
and are difficult to remove.
▶ Clean the milk frother after each
use.
Tips
¡ You can also use plant-based al-
ternatives to milk, e.g. soya milk.
¡ The quality of the milk froth de-
pends on the type of milk or plant-
based alternative used.
7.5 Dispensing a coffee drink
with milk
You can choose between cap-
puccino and lattemacchiato.
1. Fill a large cup or large glass with
approx. 100ml milk for cap-
puccino or approx. 150ml milk for
latte macchiato.
2. Place the cup or glass under the
outlet system.
3. Slide the outlet system and milk
frother right down.
4. To set the coffee strength, press
the button repeatedly.
5. Press button or
.
a The milk is first frothed up in the
cup or glass. The coffee is then
brewed and dispensed into the
cup or the glass.
Tip:To stop the current dispensing
step early, press the or
button.
7.6 Frothing up milk
1.
Fill a large cup or large glass with
approx. 100ml milk.
2. Place the cup or glass under the
outlet system.
3. Slide the outlet system and milk
frother right down.
4. Press the button.
a The milk is frothed up.
Note:To stop the dispensing pro-
cess early, press the
button.
7.7 Drink settings
Prepare a drink according to your
taste.
Adjusting the coffee strength
Before making a drink, you can ad-
just the coffee strength.
▶ To set the coffee strength, press
the button repeatedly.
Mild
Normal
Strong
Note:The coffee strength selected is
then active for all drinks made with
coffee.
To Next Page
Loading...
