4
:
Enter the phone number to be stored
Press the MUTE key
Using the one-touch memories to make
a call:
Lift the handset
Press the desired one-touch memory
key
Storing phone numbers in the two-touch
memories:
Lift the handset
Press the MUTE key
Press the MEM key
:
Press the desired memory number (0
to 9)
:
Enter the phone number to be stored
Press the MUTE key
Using the two-touch memories to make
a call
Lift the handset
Press the MEM key
:
Press the desired memory number (0
to 9)
Note:
• A phone number won’t be stored in the
memories if it is longer than 21 digits.
• You can erase a stored phone number in
a specific memory by restoring another
phone number in it.
• The keys
e are stored
independent of the used dialling mode,
but they only have effect on the TONE
dialling mode.
• It is possible to store an external phone
number in one of the one-touch or two-
touch memories, when the telephone is
connected on a PBX system. Just insert
before the phone number that will be
stored, the access code for external line
followed by a pause (press the PAUSE
key).
To Next Page
Loading...
