Siemens EX875KYW1E - Flexible Induction Cooking; Understanding flexInduction; Cookware Placement and Connection

flexInduction en
11
Fish, breaded and frozen, e.g.
fish fingers
6-7 8-15
Prawns and scampi 7-8 4-10
Sautéing fresh vegetables and
mushrooms
7-8 10-20
Stir-fry, vegetables, meat cut in
strips Asian-style
7-8 15-20
Frozen dishes, e.g. stir-fries 6-7 6-10
Pancakes, cooked one after the
other
6.5-7.5 -
Omelette (cooked one after the
other)
3.5-4.5 3-10
Fried eggs 5-6 3-6
1
Without lid
Deep-frying, 150–200g per
portion in 1–2l oil, deep-fat
fried in portions
1
Frozen products, e.g. chips,
chicken nuggets
8-9 -
Croquettes, frozen 7-8 -
Meat, e.g. chicken portions 6-7 -
Fish, breaded or battered 6-7 -
Vegetables, mushrooms,
breaded, beer-battered or tem-
pura
6-7 -
Small baked items, e.g. dough-
nuts, battered fruit
4-5 -
1
Without lid
flexInduction
8 flexInduction
You can use the flexible cooking zone as a connected
cooking zone or as two independent cooking zones, as
required.
It consists of four inductors that work independently of
each other. When the flexible cooking zone is in use,
only the area that is covered by cookware is activated.
8.1 Positioning the cookware
The flexible cooking zone can be configured in two
ways, depending on which cookware is used. In order
to guarantee good thermal detection and heat distribu-
tion, we recommend positioning the cookware in the
centre, as shown in the figures.
As a connected cooking zone
Recommended for cooking with just one item of cook-
ware.
¡ Position the cookware depending on the size:
¡ Recommended oblong cookware ⁠:
As two separate cooking zones
Recommended for cooking with two items of cook-
ware.
You can use the front and rear zone independently of
one another, and set a separate power level for each
zone.
Caution
Do not place cookware in the middle between the right
and left zones. The cooking zones are not activated
correctly and you do not achieve a good cooking res-
ult.
8.2 flexInduction disconnecting
By default, the cooking zone is configured in such a
way that the two cooking zones are connected to each
other. To separate the cooking zones:
1.
Select one of the two cooking zones.
2.
Touch ⁠.
a The Flex Zone is separated.