EasyManua.ls Logo

Siemens EX875KYW1E - Hob Locking and Basic Settings; Childproof Lock Functionality; Wipe Protection for Cleaning; Basic Settings Configuration

Siemens EX875KYW1E
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Childproof lock en
21
18.2 Cancelling the meal assistant
1.
Select the cooking zone.
2.
Select the active cooking mode and switch to a dif-
ferent cooking mode.
a The function is switched off.
Childproof lock
19  Childproof lock
The hob is equipped with a childproof lock. This pre-
vents children from switching on the hob.
19.1 Activating the childproof lock
Requirements
¡ The hob is switched on.
¡ All cooking zones are switched off.
1.
Open the docking menu.
2.
Touch ⁠.
a The hob is locked.
19.2 Switching off Childproof lock
Follow the instructions in the display panel.
a The lock is released.
19.3 Automatic childproof lock
You can also activate the childproof lock automatically
every time the hob is switched off.
You can find out how to switch the function on and off
in the "Basic settings" section →Page21.
Wipe protection
20  Wipe protection
You can use this function to lock the control panel for
cleaning so that you do not accidentally change the
settings.
The lock has no effect on the main switch.
20.1 Switching on Wipe protection
1.
Open the docking menu.
2.
Touch . A signal sounds.
a The control panel remains locked for 30seconds.
a After 30seconds, a signal tone sounds and the
control panel is unlocked.
20.2 Switching off Wipe protection
To cancel the function early, follow the instructions on
the display.
Individual safety switch-off
21  Individual safety switch-off
The safety function is switched on if one cooking zone
is in operation for an extended period and you do not
change any settings. A message appears on the dis-
play and the cooking zone stops heating.
To switch off the display and reset the cooking zone,
touch any button.
Basic settings
22  Basic settings
You can configure the basic settings for your appliance
to meet your needs.
22.1 Overview of the basic settings
Setting Description and options
Language Change the display language for the
appliance.
Home Connect You can use this function to connect
the appliance to your home network
and a mobile device.
cookConnect
System
You can use this function to control
certain functions of the extractor
hood via the hob.
Signal tones You can use this function to select
warning tones that the appliance is
to output.
Duration of the
warning signal
You can use this function to change
the duration of the warning signal.
Setting Description and options
Button tones You can use this function to select
whether the appliance emits tones
when you touch the buttons on the
touch display.
Display bright-
ness
Change the brightness of the display.
flexInduction You can use this function to set the
switch-on mode for the function after
the hob has been switched on: Two
independent cooking zones or one
single zone.
powerMove
Plus
You can use this function to change
the preset power levels of the three
cooking areas of the FlexZone.
Childproof
lock
You can use this function to automat-
ically lock the hob to prevent chil-
dren from using the appliance
without supervision.

Related product manuals