Siemens EX975LVC1E - 14.1 Flexmotion

powerBoost en
11
powerBoost
11 powerBoost
You can use this function to heat up large volumes of
water more quickly than with ⁠.
This function is available for all cooking zones,
provided the other cooking zone in the same group is
not in use.
11.1 Switching on powerBoost
1.
Select the cooking zone.
2.
Touch . The display lights up.
a The function is switched on.
Note:You can also switch on this function when cook-
ing with a connected FlexZone.
11.2 Switching off powerBoost
1.
Select the cooking zone.
2.
Touch ⁠. The ⁠display goes out and the cooking
zone switches back to the power level.
a The function has been deactivated.
Note:In certain circumstances, this function may
switch itself off automatically in order to protect the
electronic elements inside the hob.
shortBoost
12 shortBoost
You can use this function to heat up pans more quickly
than with ⁠.
This function is available for all cooking zones,
provided the other cooking zone in the same group is
not in use.
12.1 Recommended applications
¡ Do not place a lid on the pan.
¡ Never leave pans unattended when they are heating
up.
¡ Only use cold pans.
¡ Use pans with a completely flat base. Do not use
pans with a thin base.
12.2 Switching on shortBoost
1.
Select the cooking zone.
2.
Touch ⁠twice. lights up.
a The function is switched on.
Note:You can also switch on this function when cook-
ing with a connected FlexZone.
12.3 Switching off shortBoost
1.
Select the cooking zone.
2.
Touch ⁠. ⁠goes out and the cooking zone
switches back to the power level.
a The function has been deactivated.
Note:To avoid high temperatures, this function auto-
matically switches itself off after 30 seconds.
Keep-warm function
13 Keep-warm function
You can use this function to melt chocolate or butter
and to keep meals warm.
13.1 Switching on Keep-warm function
1.
Press ⁠.
2.
Select the required cooking zone within the next
10seconds.
lights up.
a The functions starts.
13.2 Switching off Keep-warm function
1.
Touch ⁠.
2.
Select the cooking zone.
goes out.
The cooking zone switches itself off and the residual
heat indicator lights up.
a The function has been deactivated.
flexMotion
14 flexMotion
You can use this function to transfer the power level
and the programmed cooking time from one cooking
zone to another.
14.1 flexMotion
Requirement:Move the cookware to a cooking zone
which is not switched on, which you have not yet pre-
set and on which no other cookware has been placed.