EasyManua.ls Logo

Siemens Gigaset AS180 - Charging Cradle Setup; Handset Preparation; Battery Installation; Battery Usage Warning

Siemens Gigaset AS180
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AS180-AS185 / IRL / A31008-M2002-V101-2-7619 / starting.fm / 03.06.2009
4
Connecting the charging cradle (if included)
Setting up the handset for use
The display is protected by a plastic film.
Please remove the protective film!
Inserting the batteries and closing the battery cover
¤ Connect the flat plug from the power supply 1.
¤ Plug the mains adapter into the plug socket 2.
If you need to disconnect the plug from the charging cradle,
press the release button 1 and disconnect the plug 2.
1
2
1
2
Warning
Use only the rechargeable batteries (
¢ page 12) recommended by Gigaset
Communications GmbH
*
. Never use conventional (non-rechargeable) batteries,
as this could result in significant health risks and damage to property. For example,
t
he outer casing of the batteries could be destroyed or the batteries could explode.
The phone could also malfunction or be damaged as a result of using batteries that
are not of the recommended type.
* Gigaset Communications GmbH is a licensee of the Siemens trademark.
¤ Insert the batteries the right
way round.
The polarity is indicated in/on
the battery compartment.
¤ Slide the battery cover back into the
main casing until it clicks into place.
If you need to open the battery cover,
f
or instance to replace the batteries,
place your fingertip in the grooved area
on the top of the cover and slide down.
+

Other manuals for Siemens Gigaset AS180

Related product manuals