How to fix no display on Siemens Handsets?
If your Siemens handset display is not working, first ensure that the handset is switched on by pressing the On-hook key until you get a confirmation. If it is still not working, the battery might be empty. Try charging or replacing the battery.
What to do if Siemens Handsets don't react to keystrokes?
If your Siemens handset is not responding when you press a key, it's possible that the keypad lock is activated. To deactivate it, press the hash key until you receive confirmation.
Why does 'Base n' flash on my Siemens Handsets?
If the 'Base n' line flashes on your Siemens handset, it could mean that the handset is out of the base radio range or the radio signals are too weak. Try moving closer to the base. It could also mean that the handset is not registered or that the intervals between synchronization attempts are too long. Try registering the handset, or switch the handset off and then on again.
Why is there nothing audible during a call on Siemens Handsets?
If you can't hear anything during a call on your Siemens handset, it's possible that the microphone and receiver are muted because the 'R key' was pressed. To reactivate them, press the 'Delete' Display key.
What to do if Siemens Handsets display 'Connect' and no calls can be made?
If your Siemens handset displays 'Connect' after pressing the Talk key, and there's no dial tone, it means the communication system is currently in use by other users. Please try your call again later.
Why do Siemens Handsets make a de-crescendo tone during input?
If you hear a de-crescendo tone sequence during input on your Siemens handset, it means an incorrect entry was made. Repeat the key sequence, carefully watching the display.
What does 'Base 1 Outgoing and incoming calls and activation/deactivation are not possible' mean on Siemens Handsets?
If your Siemens handset displays a message like 'Base 1 Outgoing and incoming calls and activation/deactivation are not possible', it means the handset is blocked. Remove the battery from the handset and then re-insert it. Proceed as when loading batteries for the first time.
Safety notes regarding the handset usage.
Safety notes regarding battery usage and disposal.
Overview of the Gigaset S1 professional handset.
Overview of the Gigaset SL1 professional handset.
Guide to making basic internal and external calls.
Instructions for turning the handset on and off.
Procedure for initiating a call by dialing first.
Procedure for initiating a call by seizing the line first.
How to redial previously called numbers.
How to book a callback when a user is busy or unavailable.
How to make an inquiry call while keeping the current call on hold.
Procedures for answering incoming calls.
How to answer a ringing call in a designated group.
How to redirect incoming calls to another number.
How to prevent accidental button presses.
Explanation of the primary function keys on the handset.
How the control key functions in different modes.
Explanation of the functions assigned to display keys.
Instructions for inserting handset batteries.
Guide to charging and using the handset batteries.
List of approved batteries for the handset.
How to change the language shown on the handset display.
How to adjust volume levels for handset and speakerphone.
How to set ringer volume and melody.
Explanation of different advisory tones and their meanings.
How to enable or disable silent alerts.
Using the speakerphone for calls.
Using voice commands to dial numbers.
Accessing and using the redial list.
Using predefined codes for speed dialling.
Managing contacts and speed dial entries on the handset.
Managing email addresses.
Assigning specific numbers to calls.
Using codes for call charging or identification.
Using the handset as an alternative phone line.
How to hide your number from the called party.
How to transfer calls to other telephones.
How to block incoming calls temporarily.
How to trace malicious calls.
Using the handset with an entrance intercom system.
How to handle a second incoming call during an active call.
How to interrupt an ongoing call to pass a message.
How to hand over a call to another user.
How to temporarily interrupt a call.
How to set up and manage conference calls.
How to manage participation in group calls.
How to set up group ringing for multiple telephones.
How calls are distributed among team members.
How to manage calls for multiple lines in a group.
How to forward calls from a Mulap line.
How to leave pre-defined or custom messages.
How to send and receive text messages.
How to respond to received messages or voicemails.
How to view and manage the list of incoming calls.
How to set and manage the alarm clock.
How to set and manage appointment reminders.
How to enter and manage system-wide appointments.
How to use predictive text for input.
How to lock the handset with a PIN.
How to program telephone lock codes.
Procedures for locking and unlocking the handset.
How to manage lock status for multiple handsets.
How to access system functions through the menu.
How to access system functions using codes.
Table listing system functions and their corresponding codes.
Solutions for common handset malfunctions.
Specifications and part numbers for the handset and accessories.
Compliance information regarding EU directives.
Statement of product compliance with regulations.
To Next Page
General