Communications
Confidential 29 COM MD CC GRM T
J. Junggebauer
Version 1.0 July 2005
7 Repair of basestation
The procedures are absolutely the same as for G340/ G345.
7.1 Disassembling of base station C350
ESD regulations have to be followed in the complete repair process!
Needed material: Suitable screw driver with cross recess,
Opening-tool G2000/4000 F30032-P175-A1
Unscrew the 3 screws of the lower case shell.
Insert the opening tool G2000/4000
Between both case shells and turn it
until the latch opens (click noise). Afterwards do the same on the other side.
To Next Page
Loading...
