Siemens Gigaset C47H - Activating;Deactivating Advisory; Tones; Setting the Alarm Clock

19
Setting the handset
Gigaset C47H / IM1 eng / A31008-M1951-R101-1-4N19 / main.fm / 29.10.08
Version 4, 16.09.2005
Deactivating the ringer tone permanently
* Press and hold the star key.
The Ú icon appears in the display.
Re-activating the ringer tone
* Press and hold the star key.
Deactivating the ringer tone for the current
call
§Silence§ Press the display key.
Activating/deactivating the alert tone
In place of the ringer tone you can activate
an alert tone. When you get a call, you will
hear a short tone ("Beep") instead of the
ringer tone.
* Press and hold the star key
and within 3 seconds:
§Beep§ Press the display key. A call will
now be signalled by one short
alert tone. You will now see
º
in the display.
Activating/deactivating advisory
tones
Your handset uses "advisory tones" to tell
you about different activities and statuses.
The following advisory tones can be acti-
vated/deactivated independently of each
other:
u Key click: every key press is confirmed.
u Advisory tones:
– Confirmation tone (ascending tone
sequence): at the end of an entry/
setting and when an SMS (depend-
ing on the base station) or a new
entry arrives in the call history
– Error tone (descending tone
sequence): when you make an
incorrect entry
– Menu end tone: when scrolling at
the end of a menu
u Battery tone: the batteries need to be
charged.
In idle status:
t
¢ Advisory Tones
¤ Change multiple line input:
Key Tones:
Select On or Off.
Confirm.:
Select On or Off.
Battery:
Select On, Off or In Call. The battery
warning tone is only activated/deacti-
vated and only sounds during a call.
¤ Save changes: (page 26).
You cannot deactivate the confirmation
tone for placing the handset in the base
station.
Setting the alarm clock
Precondition: The date and time have
already been set (page 8).
Activating/deactivating the alarm
clock and setting the wake-up time
v ¢ ì
¤ Change multiple line input:
Activation:
Select On or Off.
Time:
Enter the wake-up time in 4-digit for-
mat.
Melody:
Select melody.
Volume:
Set the volume (1–6).
¤ Save changes: (page 26).
You will see the ì icon.
A wake-up call with selected ringer tone
(page 18) is signalled on the handset.
Please note:
You can also set the call volume, ringer tones
and advisory tones using the menu.