20
Configuration with the Web browser
Gigaset SX682 WiMAX / engbt / A31008-N921-R101-2x-7619 / Start_configuration.fm / 27.3.08
Schablone 2007_10_19
Configuration with the Web browser
You do not need to install any software on your PC to configure your Gigaset SX682
WiMAX; the configuration software is stored on the device. Open this software in the
same way as an Internet page in the Web browser and make the required settings. Your
settings are then stored directly on the device.
The connection wizard will help you to get started and establish a connection with the
WiMAX network; you will not need to enter connection data to do this. You do not need
any information from your provider.
Presentation of the configuration software
To configure your Gigaset SX682 WiMAX, we recommend the Microsoft Internet
Explorer Version 7.0 or Mozilla Firefox Version 2.0 Web browser. However, you can also
use most other or older Web browsers.
ì Open your Web browser.
ì Enter the IP address of your Gigaset SX682 WiMAX in the address field of your Web
browser:
http://192.168.2.1
ì Press Enter (Return).
Your Gigaset SX682 WiMAX does not have a default system password; for this rea-
son, a security message appears first. You can set up your own system password
later; then once you have entered the IP address for your Gigaset SX682 WiMAX the
English registration page will open for you to enter your system password.
i
For experienced users:
– IP address: 192.168.2.1
– Subnet mask: 255.255.255.0
Launching the user interface
ì Click Ok.
To Next Page
Loading...
