,I#<RX#&DQQRW#5HDFK#D#'HVWLQDWLRQ#111
76
6WHS#E\#6WHS
Deleting a displayed entry:
Press the "OK" dialog key to confirm your selection
Ending callback display:
Select and confirm.
or
Press the key. The LED goes out.
or
Press the key. The LED goes out.
&DOO#:DLWLQJ#+&DPS02Q,
Precondition: You have dialed an internal number and
hear a busy signal. It is important that you reach the
called party.
Wait (approx. 5 seconds) until "Camp-on" appears on the
display and the busy tone is followed by the ring tone.
The called party can then respond (Æ page 14)
%XV\#2YHUULGH#0#-RLQLQJ#D#&DOO#LQ#
3URJUHVV
This function is only available if it has been configured
by the service technician (contact System Support).
Precondition: You have dialed an internal number and
hear a busy signal. It is important that you reach the
called party.
Select and confirm.
or
Enter the code.
The called party and person to whom this party is talk-
ing hear an alerting tone every two seconds.
If the called party has a system telephone with display,
the following appears on the screen: "Override: (station
no. or name)".
You can now start talking.
Delete?
US: Exit?
UK: End?
Program/Service
Speaker
Camp-on
The called party can prevent automatic call
waiting (Æ page 15).
Override?
oi.book Seite 43 Donnerstag, 3. August 2000 3:40 15
To Next Page
Loading...
