What does 'Time exceeded' mean on my Siemens HiPath500 Telephone Accessories?
If your Siemens Telephone Accessories displays 'Time exceeded,' it means the maximum input time was exceeded, or the On-hook key wasn't pressed. Avoid long pauses between keystrokes and press the On-hook key.
How to fix no display on Siemens Telephone?
If your Siemens Telephone display is blank, it could be due to the handset not being switched on or the batteries being flat. Try pressing the On-hook key until you receive confirmation. If that doesn't work, charge or replace the batteries.
Why is there no ringer on my Siemens Telephone?
If there's no ringer on your Siemens Telephone handset, the ringer may be deactivated, or the "Do Not Disturb" mode may be activated. To resolve this, activate the ringer and deactivate the "Do Not Disturb" setting.
What to do if I can't dial a number on my Siemens Telephone?
If you cannot dial a phone number on your Siemens Telephone, it's likely that the handset is locked. To solve this, simply unlock the handset.
What does 'Please try later' mean on my Siemens Telephone Accessories?
If your Siemens Telephone Accessories displays 'Please try later,' it indicates that the communication system is overloaded. Please wait and try again later.
What does 'Not available' mean on my Siemens Telephone Accessories?
If your Siemens Telephone Accessories displays 'Not available,' it indicates the phone number was not fully entered, or the star or hash key was not pressed. Enter the phone number correctly or as prescribed.
What does 'Not allowed' mean on Siemens Telephone?
If your Siemens Telephone displays 'Not allowed', it means an incorrect PIN was entered. Enter the correct PIN.
What to do if there is no ringer on my Siemens HiPath500?
If you can't hear the ringer on your Siemens Telephone Accessories handset, the ringer might be deactivated, or the 'Do Not Disturb' function could be activated. Try activating the ringer and deactivating the 'Do Not Disturb' setting.
Why does my Siemens Telephone say 'Connect' with no dial tone?
If your Siemens Telephone displays 'Connect' immediately after pressing the Talk key, and there's no dial tone, it indicates the communication system is being used by other users. Repeat call later.
What does it mean when 'Base n' flashes on Siemens Telephone?
If the line 'Base n' is flashing on your Siemens Telephone (where n= 1 - 4), it could mean the handset is outside the base radio range, the radio signals are too weak, the handset isn't registered, or the intervals between synchronization attempts are too long. Try moving closer to the base radio range or changing your position. You might also need to register the handset or switch it off and on again.
General| Brand | Siemens |
|---|---|
| Model | HiPath500 |
| Category | Telephone Accessories |
| Language | English |
Safety precautions and notes for using the handset.
Safety warnings and guidelines for the battery pack.
Information on the disposal of electrical and electronic equipment.
Identifies and describes the physical components and keys of the handset.
Instructions on how to make and manage basic phone calls.
Explanation of handset keys and functions.
Initial setup and preparation steps for the handset.
Customizing various settings for the handset's operation.
Advanced call handling features and operations.
Managing calls and features within defined user groups.
Handling advisory messages and text messages.
Features beyond basic calls, like alarms and reminders.
Securing the handset with PIN codes and locks.
Accessing and utilizing system-wide call features and codes.
Solutions for common malfunctions and errors.
To Next Page
