Why does my Siemens Telephone say 'Connect' with no dial tone?
If your Siemens Telephone displays 'Connect' immediately after pressing the Talk key, and there's no dial tone, it indicates the communication system is being used by other users. Repeat call later.
What does 'Not available' mean on Siemens Telephone?
If your Siemens Telephone displays 'Not available', it means the phone number wasn't fully entered, or the star or hash key wasn't pressed. Make sure to enter the phone number correctly or as prescribed.
What does it mean when 'Base n' flashes on Siemens Telephone?
If the line 'Base n' is flashing on your Siemens Telephone (where n= 1 - 4), it could mean the handset is outside the base radio range, the radio signals are too weak, the handset isn't registered, or the intervals between synchronization attempts are too long. Try moving closer to the base radio range or changing your position. You might also need to register the handset or switch it off and on again.
Why is my Siemens Telephone not reacting to key presses?
If your Siemens Telephone isn't responding to key presses, it could be that the keypad lock is activated, or a key is stuck. Try pressing the hash key until you receive confirmation, and make sure to release any stuck key.
What does 'Time exceeded' mean on Siemens Telephone?
If your Siemens Telephone displays 'Time exceeded', it means you exceeded the maximum input time or didn't press the On-hook key. To resolve this, avoid long pauses between keystrokes and press the On-hook key.
What does 'Currently not accessible' mean on Siemens Telephone?
If your Siemens Telephone displays 'Currently not accessible', it indicates that the function you're trying to use is currently unavailable, or there's no connection available under the phone number you dialed. Wait and try again later, or ensure you've entered the phone number correctly, or call the attendant console.
What does 'Please try later' mean on Siemens Telephone?
If your Siemens Telephone displays 'Please try later', it means the communication system is currently overloaded. The solution is to wait and try again later.
Why is nothing audible during a call on my Siemens Telephone?
If you can't hear anything during a call on your Siemens Telephone, it's possible that the microphone and receiver inset are muted because the "R key" was pressed. To fix this, press the "Delete" display key to reactivate the microphone and the receiver inset.
What to do if I can't dial a number on my Siemens Telephone?
If you cannot dial a phone number on your Siemens Telephone, it's likely that the handset is locked. To solve this, simply unlock the handset.
Why is there no ringer on my Siemens Telephone?
If there's no ringer on your Siemens Telephone handset, the ringer may be deactivated, or the "Do Not Disturb" mode may be activated. To resolve this, activate the ringer and deactivate the "Do Not Disturb" setting.
General| Brand | Siemens |
|---|---|
| Model | HiPath500 |
| Category | Telephone Accessories |
| Language | English |
Safety precautions and notes for using the handset.
Safety warnings and guidelines for the battery pack.
Information on the disposal of electrical and electronic equipment.
Identifies and describes the physical components and keys of the handset.
Instructions on how to make and manage basic phone calls.
Explanation of handset keys and functions.
Initial setup and preparation steps for the handset.
Customizing various settings for the handset's operation.
Advanced call handling features and operations.
Managing calls and features within defined user groups.
Handling advisory messages and text messages.
Features beyond basic calls, like alarms and reminders.
Securing the handset with PIN codes and locks.
Accessing and utilizing system-wide call features and codes.
Solutions for common malfunctions and errors.
To Next Page
