Need help?Do you have a question about the Siemens IM 153-4 PN and is the answer not in the manual?
General| Product Type | Interface module |
|---|---|
| Communication Protocol | PROFINET |
| Power Supply | 24 V DC |
| Protection Class | IP20 |
| Mounting Type | DIN Rail |
| Number of Ports | 2 |
| Temperature Range | -25 to +60 °C |
| Number of IO Modules | 1 |
| Data Transfer Rate | 10/100 Mbit/s |
| Weight | 0.3 kg |
Details the properties and functions of different IM 153-x interface module variants.
Provides a step-by-step guide for commissioning the ET 200M on PROFIBUS DP.
Describes the steps to put the hardware into service after installation and wiring.
Outlines the requirements and steps for commissioning a PROFIBUS DP slave.
Explains how to configure the ET 200M on PROFINET IO using STEP 7.
Describes module replacement when the 'Change During Operation' function is off.
Explains how to replace modules while the system is running.
Explains how to time stamp input signals using the IM 153-2 module.
Covers the use and conditions for redundant configurations with IM 153-2.
Explains the isochrone mode and its configuration for synchronized operation.
Provides detailed technical specifications for IM 153-1, IM 153-2, and IM 153-2 FO.
Lists the technical specifications for the IM 153-4 PN interface module.
To Next Page