To Next PageTo Next Page
Need help?Do you have a question about the Siemens SIMATIC TP900 Comfort INOX PCT and is the answer not in the manual?
General| Resolution | 800 x 480 pixels |
|---|---|
| Power Supply | 24 V DC |
| Enclosure Material | Stainless Steel |
| Mounting | Panel mounting |
| Display Type | TFT |
| Touch Technology | Projected capacitive |
| Protection Rating | IP66 |
| Operating Temperature | 0°C to 50°C |
| Interfaces | Ethernet, USB, RS485/422 |
| Relative Humidity | 10% to 90% (non-condensing) |
Details the INOX devices covered by these instructions and their relation to standard devices.
Explains terms used in the document and their corresponding applicability.
Notes that document illustrations may differ from specific device particularities.
Describes the SIMATIC INOX HMI devices, their features, and intended industry applications.
Lists all items included in the package with the HMI device.
Illustrates the front and side views of the HMI devices, identifying key components.
Details the rear interfaces of the 7", 9", and 12" HMI device variants.
Lists available service packs and other accessories for the INOX devices.
Specifies the intended applications and environments for the HMI devices.
Covers crucial safety aspects for installation, operation, and maintenance.
Information on managing device security and user access.
Guidelines on installation location and operating environments.
Warnings and precautions for operating in potentially explosive environments.
Important considerations for safe setup and running of the device.
Proper methods for interacting with the capacitive touch screen.
Steps and checks required before installing the HMI device.
Procedure for correctly installing the device's mounting seal.
Step-by-step guide for physically installing the HMI device.
Guidelines and specifications for connecting power supply cables.
Precautions for securing cables in potentially explosive environments.
Procedures and guidelines for cleaning the HMI device.
Specific instructions for cleaning with pressure washers.
Care instructions for the stainless steel front panel.
Method for cleaning the touch screen safely.
Information on the resistance of materials to various chemicals.
Notes that manual calibration is not required for capacitive touch screens.
Guidance on environmentally sound recycling and disposal of the devices.
Details about pre-installed operating system licenses.
Lists relevant certifications and approvals for the HMI devices.
Information on EMC compliance and installation guidelines.
Specifies permitted conditions for storage and operation.
Details temperature, humidity, and pressure limits for operation.
Technical details on device protection and testing.
Provides dimensional drawings for different device sizes.
Summarizes weight, display, material, and power supply details.
Resources for obtaining technical assistance and information.
Information on finding software updates and related tools.
Glossary of common abbreviations used in the document.
