Home Connect en
25
Automatic registration in the home network
You require a router that has WPS functionality.
You require access to your router.If you do not have
this, follow the steps for "Manual registration in the
home network".
1. Touch the 0 symbol for 4 seconds.
Product information will be displayed.
2. Touch the 0 symbol repeatedly until the •’‚
setting appears.
‹ lights up on the cooking position display.
3. Set the ‚ value on the control panel.
‚ and the D symbol will flash on the cooking
position display.
4. Press the WPS button on the router within the next
2 minutes.
The hob is connected to the home network if the
D symbol no longer flashes but is lit up on the
cooking position display.
Note: If a connection cannot be established, the
"Connect manually" ƒ value appears.Register the
appliance in the home network manually or try
connecting automatically again.
The appliance automatically tries to connect to the
app and the •’ƒ setting appears.The ‚ value
flashes on the control panel.
5. Start the app on the mobile device and follow the
instructions for automatic network registration.
The registration procedure has been completed once
the ‹ value appears on the cooking position display.
Manual registration in the home network
1. Touch the 0 symbol for 4 seconds.
Product information will be displayed.
2. Touch the 0 symbol repeatedly until the •’‚
setting appears.
‹ lights up on the cooking position display.
3. Set the ƒ value on the control panel.
ƒ and the D symbol will flash on the cooking
position display.
4. Use the "Home Connect" SSID and the "Home
Connect" key to register the mobile device on the
hob network.
To Next Page
Loading...
