Siemens iQ300 KF96NA Series - Removing the Fittings; Removing Appliance Components

Cleaning and servicing en
51
4. Insert the fittings and install the ap-
pliance components.
5. Electrically connect the appliance.
→Page39
6. Putting the food into the appliance.
14.3 Removing the fittings
If you want to clean the fittings thor-
oughly, remove these from your ap-
pliance.
Removing the shelf
▶ Lift the shelf at the front , pull it
out and remove it ⁠.
→Fig. 5
Removing door rack
▶ Lift the door rack and remove it.
→Fig. 6
Removing the storage container
1. Pull out the storage container as
far as it will go.
2. Lift the storage container at the
front and remove it ⁠.
→Fig. 7
Removing the fruit and vegetable
container
1. Pull out the fruit and vegetable
container as far as it will go.
2. Lift the fruit and vegetable con-
tainer at the front and remove it
⁠.
→Fig. 8
Removing the frozen food
container
1. Take out the frozen food container
as far as it will go.
2. Lift the frozen food container at the
front and remove it ⁠.
→Fig. 9
14.4 Removing appliance
components
If you want to clean your appliance
thoroughly, you can remove certain
components from your appliance.
Removing the shelf above the fruit
and vegetable container
▶ Lift the shelf above the fruit and ve-
getable container at the front
and remove it ⁠.
→Fig. 10
Removing the fruit and vegetable
container cover
1. Pull out the fruit and vegetable
container as far as it will go.
2. Lift the fruit and vegetable con-
tainer cover slightly , pull it for-
wards and remove it ⁠.
→Fig. 11