en
7
Fixing the door handle
Before you use the product, please check the handles
of the appliance. If a handle is loose, you should fix it
with the hexangular screwdriver i n the clockwise
direction, then it can be used normally.
Aligning the appliance
To ensure that the appliance functions correctly, it must
be set level with a spirit level.
Ø For sufficient leveling and air circulating in the lower
rear section of the appliance, the bottom feet may
need to be adjusted.
Ø To allow the doors to selfclose, tilt back the top
backwards at about 15 mm or 0.5° by turning t he
adjustable feet.
Ø Whenever you want to move the appliance,
remember to turn the feet back up, so t hat the
appliance can roll freely.
Ø The rollers, which are not castors, should be only
used for forward or backward movement. Moving
the refrigerator sideways may damage your floor
and the rollers.
Ø Reinstall the appliance when relocating.
0.5°
15 mm
adjustable bottom feet
Aligning the doors
When you found the doors are not at the same level,
you can use a spanner to adjust the fridge door.
Only the fridge door can be adjusted.
To raise the fridge door, turn the bolt (1) anticlockwise.
To lower the fridge door, turn the bolt (1) clockwise.
Once in position, lock the nut (2).
To Next Page
Loading...
