Siemens iQ500 KG86N Series - Preparing the Appliance for the First Time; Connecting the Appliance to the Electricity Supply; Familiarising Yourself with Your Appliance; Appliance

en Familiarising yourself with your appliance
44
4.4 Preparing the appliance
for the first time
1. Remove the informative material.
2. Remove the protective foil and
transit bolts, e.g. remove the ad-
hesive strips and carton.
3. Clean the appliance for the first
time. →Page54
4.5 Connecting the appliance
to the electricity supply
1. Insert the mains plug of the appli-
ance's power cable in a socket
nearby.
The connection data of the appli-
ance can be found on the rating
plate. →Fig.
1
/
5
2. Check the mains plug is inserted
properly.
a The appliance is now ready for
use.
5 Familiarising yourself
with your appliance
5.1 Appliance
You can find an overview of the parts
of your appliance here.
→Fig.
1
A
Refrigerator compartment
→Page51
B
Freezer compartment
→Page51
1
Lighting
2
Snack container →Page45
3
Interior ventilation opening
4
Temperature controller (stor-
age container) →Page48
5
Rating plate →Page60
6
Storage container
→Page46
7
Fruit and vegetable container
with humidity control
→Page46
8
Frozen food container
→Page54
9
Ice cube maker →Page47
10
Screw foot
11
Butter and cheese compart-
ment →Page47
12
Control panel
13
Variable shelf →Page45
14
Door storage compartment
for large bottles →Page47
15
Container divider →Page46
Note:Deviations between your appli-
ance and the diagrams may differ
with regard to their features and size.
5.2 Control panel
You can use the control panel to con-
figure all functions of your appliance
and to obtain information about the
operating status.
→Fig.
2
1
Displays the set temperature
for the freezer compartment
in °C.
2
Displays the set temperature
for the refrigerator compart-
ment in°C.
3
appears when the alarm
is switched on.
4
is used to select a com-
partment in order to change
the temperature or switch on
certain additional functions.