Siemens iQ500 KI81RA Series - Removing Internal Fittings; Removing Major Appliance Components

en Cleaning and servicing
20
2. Remove the shelf above the fruit
and vegetable container.
→Page20
3. Carefully clean the condensation
channel and the drainage hole,
e.g. using a cotton bud.
→Fig. 8
12.4 Removing the fittings
If you want to clean the fittings thor-
oughly, remove these from your ap-
pliance.
Removing the shelf
▶ Lift the shelf at the front , pull it
out and remove it ⁠.
→Fig. 9
Removing door rack
▶ Lift the door rack and remove it.
→Fig. 10
Removing the storage container
1. Pull out the storage container as
far as it will go.
2. Lift the storage container at the
front and remove it ⁠.
→Fig. 11
Removing the fruit and vegetable
container
Removing the front of the
container
You can remove the front of the fruit
and vegetable container and frozen
food container to facilitate cleaning.
▶ Press in the snap-in hooks on the
side of the container and re-
move the front from the container
in a turning motion ⁠.
→Fig. 12
12.5 Removing appliance
components
If you want to clean your appliance
thoroughly, you can remove certain
components from your appliance.
Removing the door rack rail
▶ Lift the door rack rail upwards and
remove it.
→Fig. 13
Shelf above the fruit and
vegetable container
You can remove the cover of the fruit
and vegetable container in order to
clean it thoroughly.
Removing the shelf above the fruit
and vegetable container
1. Remove the storage container.
→Page20
2. Remove the fruit and vegetable
container. →Page20
3. Remove the shelf above the veget-
able container. →Page20
Fitting the shelf above the fruit and
vegetable container
1. Ensure that the spoiler on the shelf
above the fruit and vegetable con-
tainer is positioned correctly.
→Fig. 14
2. Insert the shelf above the fruit and
vegetable container.