Siemens IQ500 WG46G2ZEIE - Using the Measuring Aid; Adding Detergent and Care Product; Starting and Managing Programmes

en Basic operation
30
2. Press down on the insert and re-
move the detergent drawer.
3. Insert the measuring aid.
13.6 Using the measuring aid
To more easily measure the liquid
detergent, you can use a measuring
aid in the detergent drawer.
Note:Do not use a measuring aid for
viscous detergents, for washing
powder, or when the prewash or pro-
gramme end time is activated.
Requirements
¡ The detergent drawer →Page18
has been pulled out.
¡ The measuring aid is inserted.
→Page29
1. Slide the measuring aid forwards.
2. Fold the measuring aid down and
click it into place.
13.7 Adding detergent and
care product
Note:Observe the information about
detergents and care products
→Page29.
1. Pull out the detergent drawer.
2. If required, use the dosing aid.
→Page30
3. Pour in the detergent.
→"Detergent drawer", Page18
4. If required, add the care product.
5. Push in the detergent drawer.
13.8 Starting the programme
Requirement:A programme is set.
→"Setting a programme", Page29
▶ Press Start Reload.