Siemens IQ500 - Page 22

en Display
22
Display Designation Description
Rinse Programme status
Spin Programme status
– –– Rinse Hold Programme status
End End of programme Programme status
Childproof lock ¡ Lights up: The childproof lock is activated.
¡ Flashes: The childproof lock is active and the pro-
gramme selector has been adjusted.
→"Deactivating the childproof lock", Page38
Less Ironing The reduced creasing function is activated.
→"Buttons", Page23
Prewash Prewash is activated.
→"Buttons", Page23
varioSpeed Short wash activated.
→"Buttons", Page23
1
Energy consumption Energy consumption for the selected programme.
¡ : Low energy consumption
¡ : High energy consumption
Reminder to clean the
drum
Flashes: Drum is dirty. Run the Drum Cleanpro-
gramme for cleaning and caring for the drum and the
outer tub.
→"Cleaning the drum", Page40
⁠ Voltage control system Flashes: The automatic voltage control system detects
impermissible voltage drops. This will pause the pro-
gramme.
Note:The programme will continue when the voltage
is permissible again.
⁠ Voltage control system Flashes: The programme has been paused because of
impermissible voltage drops. The voltage is permiss-
ible again and the programme will continue.
Note:The programme duration is extended.
Door ¡ Lights up: The door is locked and cannot be
opened.
¡ Flashes: The door is not closed properly.
¡ Off: The door is unlocked and can be opened.
Tap ¡ No water pressure.
¡ The water pressure is too low.
E:60 / -2B
1
Error Error code, error display, signal.
1
Example