Siemens iQ700 CT636LE 6 Series - Page 54

54
en Home Connect
Connecting with app
The Home Connect App can be installed on
any number of mobile devices, which can
then be used to connect to the fully auto-
matic co󰀨ee machine.
The fully automatic co󰀨ee machine must
already be connected to the WLAN network�
■ Open the app on the mobile device�
■ Press button A to open the menu�
■ Touch arrow key L repeatedly until the
display shows “Home Connect”.
■ Touch [ Home Connect Settings ].
■ Touch [ Next ]�
■ Touch [ Connect with app ] to connect to
the appliance with the app�
Remote start
If you wish e�g� to start drinks dispensing
on the fully automatic co󰀨ee machine via
a mobile device, Remote start must be
activated�
B
Risk of burns!
If an unattended remote start takes
place, third parties might be scalded
if they reach under the coffee dis-
penser during drinks dispensing. You
should therefore make sure that with
an unattended remote start that there
is no risk to other people, in particu-
lar not to children, or to property�
F
The [ Remote start ] text field is is
only visible if connection with Home
Connect has been successfully
completed�
If Remote start is switched off, only
the modes of the fully automatic
coffee machine are displayed in the
Home Connect App�
■ Press button A to open the menu�
■ Touch arrow key L repeatedly until the
display shows “Home Connect”.
■ Touch [ Home Connect Settings ].
■ Touch [ Next ]�
■ Touch [ Remote start ] to switch the
function Remote start “On” and “Off”�
Device Info
Display for network and device information
■ Press button A to open the menu�
■ Touch arrow key L repeatedly until the
display shows “Home Connect”.
■ Touch [ Home Connect Settings ].
■ Touch [ Next ]�
■ Touch [ appliance Info ]� The SSID, IP,
MAC address and serial number of
the appliance are displayed for a few
seconds�
Display
The top right-hand corner of the display
shows the Home Connect status with a
symbol:
Connected to the network
Not connected to the network
No connection to server
Remote diagnostics
Customer Service can use Remote
Diagnostics to access your appliance if
you contact them and have your appliance
connected to the Home Connect server
and if Remote Diagnostics is available
in the country in which you are using the
appliance�
Note: For further information and
details about the availability of Remote
Diagnostics in your country, please visit
the Service/Support section of your
local website: www�home-connect�com:
www.home-connect.com
Information on data protection
When the fully automatic co󰀨ee machine
is connected for the rst time to a WLAN
network which is connected to the Internet,
the appliance transmits the following cate-
gories of data to the Home Connect server
(initial registration):
■ Unique appliance identication (con-
sisting of appliance codes as well as
the MAC address of the installed Wi-Fi
communication module)�