Siemens iQ700 EX8 HVC Series - Activating flexInduction; Time-Setting Options; Using the Switch-off Timer

Time-setting options en
11
¡ Position the cookware depending on the size:
¡ Recommended oblong cookware ⁠:
As two separate cooking zones
Recommended for cooking with two items of cook-
ware.
You can use the front and rear zone independently of
one another, and set a separate power level for each
zone.
10.2 Switching on flexInduction
1.
Place the cookware on the cooking zone.
2.
The appliance detects the cookware and selects the
cooking zone.
a The cooking zones split or connect automatically
depending on the size and position of the cook-
ware.
a If the flexible zone is separated, lights up more
brightly.
Notes
¡ By pressing , you can manually change the set-
tings for the cooking zones.
¡ If you move or lift the cookware from an active con-
nected cooking zone, an automatic search starts.
Each item of cookware that is found within the cook-
ing zone during this search is heated at the previ-
ously selected power level.
Time-setting options
11 Time-setting options
Your hob has various functions for setting the cooking
time:
¡ Switch-off timer
¡ Timer
The button is assigned to the Switch-off timer func-
tion by default. However, you can also assign one of
the above-mentioned functions to the sensor.You can
change these settings via the Home Connect app or in
the basic settings →Page15.
11.1 Switch-off timer
Allows you to programme a cooking time for one or
more cooking zones and their automatic switch-off
once the time set has elapsed.
Switching on Switch-off timer
1.
Select the cooking zone and the power level.
2.
Press ⁠.
a and light up.
3.
Within the next 10seconds, set the required cook-
ing time in the settings area.
4.
Touch to confirm.
a Once the cooking time has elapsed, the cooking
zone is switched off and a signal sounds.
Notes
¡ If a cooking time has been programmed in a cook-
ing zone in which the fryingSensor is activated, the
programmed cooking time will start to count down
as soon as the selected temperature level has been
reached.
¡ To switch the display between the operating temper-
ature fryingSensor and the programmed cooking
time, press the selected temperature.
Changing or switching off Switch-off timer
1.
Select the cooking zone and then touch ⁠.
2.
To switch off the function, change the cooking time
or set it to ⁠.
11.2 Timer
Enables a clock to be activated. This function operates
independently of the cooking zones and other settings.
It does not automatically switch off the cooking zones.
Switching on Timer
Requirement:Assign the function to ⁠.
1.
Press ⁠.
2.
Select the required time.
a The time starts to elapse.
a A signal tone sounds and the displays flash once
the time has elapsed.