Siemens KG56FSB40 - Setting the Temperature; Special Functions

en
10
Operating tips
■ After the appliance has been switched
on, it may take several hours until the
set temperatures have been reached.
■ The fully automatic No Frost system
ensures that the freezer section
remains free of ice. Defrosting is no
longer required.
■ If the door cannot be immediately re-
opened after it has been closed, wait
until the resulting low pressure has
equalised.
■ The front and side panels
of the housing are partly heated
slightly. This prevents condensation
from forming.
Setting
the temperature
Fig. $
Refrigerator compartment
The temperature can be set from +2 °C
to +8 °C.
1. Press selection button 10 until
refrigerator compartment display 1 is
activated.
2. Keep pressing +/– buttons 11 until
the required temperature is indicated.
Perishable food should not be stored
above +4 °C.
hyperFresh compartment
The temperature can be set from -1°C to
3°C.
1. Press selection button 10 until
hyperFresh 4 display is activated.
2. Keep pressing +/- buttons until the
required temperature is indicated.
Freezer compartment
The temperature can be set from -16°C
to -24°C.
1. Select the freezer compartment using
the compartment button.
2. Keep pressing the +/- buttons until the
required temperature is indicated.
Special functions
Fig. $
Eco mode
The eco mode switches the appliance to
energy-saving operation.
Switching on:
Press the eco button.
The appliance automatically sets
the following temperatures:
■ cooling compartment: +8°C
■ hyperFresh compartment: +3°C
■ freezer compartment: -16°C
Switching off:
Press the eco button.