HomeConnect en
17
The HomeConnect app guides you
through the entire login process. Fol-
low the instructions in the HomeCon-
nect app to configure the settings.
Tips
¡ Please consult the documents sup-
plied by HomeConnect.
¡ Please also follow the instructions
in the HomeConnect app.
Notes
¡ Please note the safety precautions
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the HomeConnect app.
→"Safety", Page4
¡ Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
HomeConnect app.
10.1 Setting up HomeCon-
nect
Requirement:The HomeCon-
nectapp has been installed on your
mobile device.
1. Scan the QR code using the
HomeConnectapp.
2. Follow the instructions in the
HomeConnectapp.
10.2 Installing updates for the
Home Connect software
The appliance searches for updates
to the HomeConnect software at reg-
ular intervals.
Note:If updates are available, the
temperature display shows .
To reset the update and the temper-
ature display to the set temperature,
press any touch field.
1. Press .
a The temperature display shows .
2. Press repeatedly until the tem-
perature display shows .
3. Press .
a The temperature display shows an
animation.
a The update is installed.
a The control panel is locked during
the installation.
a If the installation is successful, the
temperature display shows .
4. If the temperature display shows
, the appliance was unable to in-
stall the update.
‒ Repeat the process at a later
point.
5. If the update cannot be completed
after several attempts, contact cus-
tomer service →Page27 .
10.3 Resetting HomeConnect
settings
If your appliance experiences con-
nection problems with the WLAN
home network (Wi-Fi) or your appli-
ance wants to log into a different
WLAN home network (Wi-Fi), you can
reset the HomeConnectsettings.
1. Press .
a The temperature display shows .
2. Press repeatedly until the tem-
perature display shows .
To Next Page
Loading...
